PHI Tube End Finishing Machine -- Model DF
The PHI Tube End-Finishing Machine Model DF is a double-lap flaring machine that produces a double-thickness flare. It will also produce a single-thickness flare and an upset bead.
How the PHI Double Flaring Tube End-Finishing Machine WorksThe machine forms double-lap flares to precise 37-degree and 45-degree dimensions within MS and SEA specification. Single flares and beads are also done with precision and within specifications every time.
The Model DF is a high-production unit, allowing for the production of up to 600 double flares per hour. A single lever operates the machine. This lever activates the two steps required to form a double flare. No electricity is required because all operations are pneumatically powered. DF Specifications | | | | Capacity | Double Lap Flaring: 1/8" to 1/2" OD
annealed ferrous or non ferrous tubing
Single flaring: 1/8" to 3/4" O.D.
annealed ferrous or non ferrous tubing
Beading: 3/16" to 1/2" OD
annealed ferrous or non ferrous tubing | | Operation | 75/100 PSI, air supply required.
Air consumption approximately 1 1/2 CFM at 100 PSIG.
No electrical connection. | | Air Supply | 75/100 PSI, air supply required. Air consumption
approximately 1 1/2 CFM at 100 PSIG. No electrical
connection. | | Standard Tooling | For MS and SAE flare specifications | | Dimensions | Length 28" Width 18" Height 42" | | Shipping Weight | 480 Pounds | |
